How to add project/survey
We have created a tutorial to help you understand this topic in an easy way.
Note: Follow this part for a pre-added project in the system. If you want to know about how to add a project, then search for the topic “How to add a new project”.
- To start a drone survey, tap on Start Survey button.
- It will show you a popup of existing projects, here you need to tap on the project you want to take survey for.
On the next screen it will ask you to Verify Aircraft Settings, you can tap YES if you want to make modifications or changes. Otherwise tap NO.
Note: To know more about Aircraft Settings, search for the topic ‘Aircraft Settings’.
On this screen it will ask you to adjust House Height if needed and will also show you additional information about Waypoints & Obstacles, to continue towards the flight, tap SELECT
– House Height
– Subject Photo Height
– Horizon Scan Height
- Upon start drone starts flying towards Waypoint 1
- Then it flies to next waypoint and takes picture at each point.
- At the end drone will automatically land to home location.
This is the actual flight screen where you will see all metrics about the flight. To understand the icons and the inputs in the screen, please refer to the next page.
If you think all information is correct and drone is ready to fly. Tap & Hold the GO button and drone will start flying over the waypoints and start taking pictures.
Here are the steps that the drone follows:
NOTE: Check the obstacles and all options in case it needs updates to avoid crashes and data inaccuracy.
- Once flight is completed, drone will fetch the media and ask you to upload images automatically.
To connect your drone with EagleEye, first connect your device with the remote controller and then turn the drone on.
Once your drone is switched on. It will automatically connect with EagleEye App.
Screen state will change from red to green which indicates drone is connected successfuly.
When drone is disconnected
When drone is connected
Drone Pairing: Normally drone will automatically pair with the app, but in case if you still see the following on your screen, then tap Pair while your remote controller is connected to the phone and drone is turned on.
Manual Pairing: In case you are unable to pair automatically, then check the bottom right side of your drone and open the lid and press the start pairing button. Once the light turns from Green to red, the RC and aircraft will be linked.
